Spanning Tree Protocol

Spanning Tree Protocol

Spanning Tree Protocol (STP) is a protocol used to prevent loops in a network topology that can cause broadcast storms, packet loss, and other network issues. STP creates a loop-free topology by blocking some redundant paths while keeping one active path.

STP operates by first selecting a root bridge in the network, which becomes the central point for the spanning tree. All other switches in the network are connected to the root bridge through one or more paths, and STP ensures that only one path is active while the others are blocked.

STP works by exchanging Bridge Protocol Data Units (BPDUs) between switches in the network. BPDUs are used to determine the root bridge, as well as the best path to the root bridge from each switch. Once the root bridge and active paths have been determined, STP blocks all other redundant paths to prevent loops in the network.

There are different versions of STP, including the original STP (802.1D), Rapid Spanning Tree Protocol (RSTP or 802.1w), and Multiple Spanning Tree Protocol (MSTP or 802.1s). RSTP and MSTP are newer versions of STP that have faster convergence times and improved network performance. One potential issue with STP is that it can result in suboptimal network performance if the active path is not the most direct path between two switches. To address this, some network administrators may use alternative protocols, such as Link Aggregation Control Protocol (LACP) or Shortest Path Bridging (SPB), which provide faster convergence times and better network performance than STP.

Apply for Router Support Certification Now!!

https://www.vskills.in/certification/certified-router-support-professional

Back to Tutorial