OSPF Areas Advantages Configuration

OSPF Areas Advantages Configuration

OSPF areas are used to scale large networks by dividing the network into smaller, more manageable subnetworks. Each area has its own routing table, and routers in one area don’t need to know about the topology of other areas, except for a summary route. This reduces the size of the SPF calculation and makes OSPF more efficient and scalable.

OSPF areas are identified by a 32-bit number called an Area ID, which is represented in dotted decimal format. Area 0.0.0.0 is called the backbone area and is mandatory for all OSPF networks. All other areas must be connected to the backbone area either directly or through other areas.

To configure OSPF areas, you need to assign each interface on a router to a specific area. This can be done by configuring the area ID on each interface using the ip ospf area <area-id> command. You can also use the network <network-address> <wildcard-mask> area <area-id> command to configure OSPF on a range of interfaces that belong to the same network or subnet. When configuring OSPF areas, it’s important to consider the size and complexity of the network, as well as the traffic patterns and routing requirements. A good practice is to divide the network into areas based on geographic location, function, or traffic volume. This can help to reduce the number of routes and simplify the routing process, making the network more efficient and easier to manage.

Apply for Router Support Certification Now!!

https://www.vskills.in/certification/certified-router-support-professional

Back to Tutorial