Stay Ahead with the Power of Upskilling - Invest in Yourself! 
Frame Relay Verification
To verify the Frame Relay configuration on a Cisco router, you can use the following commands:
show interfaces serial [interface-number]: This command displays the Layer 1 and Layer 2 status of the specified serial interface. It also shows the encapsulation type, LMI type, and DLCI number.
show frame-relay lmi: This command displays the status of the LMI connection between the local router and the Frame Relay switch.
show frame-relay map: This command displays the mappings between the local DLCIs and the remote Layer 3 addresses.
show frame-relay pvc [pvc-id]: This command displays information about the specified PVC, including the DLCI, status, input and output rate, and BECN and FECN statistics.
show frame-relay route: This command displays the routing table for the Frame Relay network.
debug frame-relay events: This command enables debugging messages for Frame Relay events.
debug frame-relay packets: This command enables debugging messages for Frame Relay packets. These commands can help you troubleshoot and verify your Frame Relay configuration on Cisco routers.
Apply for Router Support Certification Now!!
https://www.vskills.in/certification/certified-router-support-professional
