Frame Relay Concepts

Frame Relay Concepts

Frame Relay is a packet-switched data communication technology that operates at the Data Link layer (Layer 2) of the OSI model. It was commonly used for connecting Local Area Networks (LANs) and Wide Area Networks (WANs) before being largely replaced by newer technologies such as MPLS and VPNs.

Frame Relay uses a virtual circuit switching method to transmit data across a network. A virtual circuit is a logical connection between two devices across a network that behaves as if it were a dedicated physical connection. Data is sent in the form of frames, which are small units of data transmitted over the virtual circuit.

In a Frame Relay network, there are two types of devices: Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE). DTE devices, such as routers or switches, connect to the network through a DCE device, such as a Frame Relay switch. The DCE device provides the physical connection to the network and manages the virtual circuits between the DTE devices.

Frame Relay uses DLCI (Data Link Connection Identifier) to identify each virtual circuit. Each DLCI is associated with a particular destination and is used to route frames to the correct destination.

One of the main advantages of Frame Relay is its ability to support multiple virtual circuits over a single physical connection. This is known as multiplexing and allows multiple devices to share the same connection to the network, which can be cost-effective. However, one of the disadvantages of Frame Relay is that it does not provide any error correction or retransmission of lost data. Therefore, it relies on the higher layer protocols to handle these issues.

Apply for Router Support Certification Now!!

https://www.vskills.in/certification/certified-router-support-professional

Back to Tutorial