Stay Ahead with the Power of Upskilling - Invest in Yourself! 
Clock Rates Synchronization DCE and DTE
In a WAN environment, clock rates and synchronization are critical to ensure that data is transmitted accurately and efficiently between devices.
A Data Communications Equipment (DCE) device, such as a modem or a CSU/DSU, is responsible for providing the clocking signal to the Data Terminal Equipment (DTE) device, such as a router or a switch. This is because the DCE device is typically the one that connects directly to the WAN service provider’s network, and thus has a more stable clock source.
The clock rate determines the speed at which data is transmitted across the WAN link. The clock rate is typically set by the DCE device, and the DTE device must be configured to match it. The clock rate is usually expressed in bits per second (bps) or in the case of WAN links, kilobits per second (Kbps), megabits per second (Mbps) or gigabits per second (Gbps).
Synchronization refers to the process of aligning the clocks of the DCE and DTE devices to ensure that data is transmitted at the correct speed and timing. There are several methods used to achieve synchronization, depending on the WAN technology being used.
For example, in T1/E1 connections, the DCE device generates a timing signal that is transmitted to the DTE device over a separate wire. This timing signal is used to synchronize the clocks of the DCE and DTE devices.
In Frame Relay and ATM networks, synchronization is achieved through the use of virtual circuits (VCs). Each VC has its own clock source, which is used to synchronize the clocks of the DCE and DTE devices at each end of the connection.
Apply for Basic Network Support Certification Now!!
https://www.vskills.in/certification/certified-basic-network-support-professional
