The ping command

The ping command

The ping command is a utility used to test the reachability of a network device by sending ICMP (Internet Control Message Protocol) echo request packets and receiving ICMP echo reply packets. It is a commonly used command for network troubleshooting and diagnostics.

Here’s how to use the ping command:

Open a command prompt or terminal window on your computer.

Type “ping” followed by the IP address or hostname of the device you want to ping. For example, “ping 192.168.0.1” or “ping google.com”.

Press the Enter key to start the ping test.

The ping command will send several ICMP echo request packets to the destination device and display the responses it receives. By default, it will send four packets and display the round-trip time for each packet, as well as the percentage of packets that were lost.

If the ping test is successful, you will see a message indicating that the destination device is reachable. If the test is unsuccessful, you may receive an error message indicating that the packets were lost or that the destination device is unreachable.

The ping command can be modified with various options and parameters to customize its behavior. For example, you can specify the number of packets to send, set the time between packets, or use specific IP addresses or interfaces. You can view the available options by typing “ping /?” on a Windows computer or “man ping” on a Unix/Linux-based system.

Apply for Router Support Certification Now!!

https://www.vskills.in/certification/certified-router-support-professional

Back to Tutorial

Get industry recognized certification – Contact us

Menu