OSPF Single area and Multiple Areas Configuration

OSPF Single area and Multiple Areas Configuration

In OSPF, a network can be divided into multiple areas for better scalability, faster convergence, and simpler configuration. The OSPF backbone area (Area 0) is the central hub for all other areas and serves as a transit area for routing information exchange. All non-backbone areas must be connected to the backbone area.

Here are the steps to configure OSPF with multiple areas:

Assign an area ID to each area: You need to assign a unique ID to each area, including the backbone area.

Configure the backbone area: Configure the backbone area as Area 0. This is essential for OSPF to work properly.

Configure the interfaces: Assign each interface to a corresponding OSPF area. This can be done using the ip ospf area command.

Configure the OSPF process: Define the OSPF process and specify the router ID using the router ospf process-ID command.

Configure the OSPF neighbors: Use the neighbor command to establish OSPF neighbors between routers.

Verify the OSPF configuration: Use the show ip ospf command to check if OSPF is running and if the routers have formed adjacencies with their neighbors.

In OSPF, multiple areas provide better scalability by reducing the size of the link-state database and reducing the amount of routing information exchanged between routers. They also improve network performance by reducing the amount of traffic generated by the routing protocol. However, multiple areas require careful planning and configuration to ensure proper routing and connectivity between all areas.

Apply for Router Support Certification Now!!

https://www.vskills.in/certification/certified-router-support-professional

Back to Tutorial

Get industry recognized certification – Contact us

Menu