- Switch off the computer power and disconnect the power cord.
- Remove the computer top cover as per the chassis manual.
- Touch an unpainted, grounded metal object to discharge any static electricity stored on your clothing or body.
- Locate the memory expansion sockets on the computer motherboard. If all the sockets are full, remove smaller capacity modules to allow room for higher capacity modules.
- Remove the memory module from its anti-static package, handling it by the edges; do not flex or bend the module. Locate notches on the bottom edge of the module to align it over the open memory slot.
- Firmly insert the bottom edge of the memory module into the slot.
- Press down evenly against the module’s upper corners. The end latches snap into position, holding the module in place. To avoid damaging a memory module slot, move the end latches slightly outward to relieve pressure. The module clicks into place.
- After completely seating module in the socket. Repeat this procedure for any additional modules to install.
- Reinstall any components or cables add-on you may have removed. Replace the screw that secures the power supply to the chassis.
Apply for IT Support Certification
https://www.vskills.in/certification/certified-it-support-professional
